Seite wählen

BK Precision 4047B 20MHz Dual Channel Function/Arbitrary Waveform Generator


•Sine and square frequency range:  0.01 Hz – 20 MHz
•Triangle/ramp frequency range: 0.01 Hz – 2 MHz
•Resolution: up to 8 Digits
•Pulse: 0.01 Hz – 20 MHz
•Accuracy: 0.001% (10 ppm) at < 500 Hz: 0.001% + 0.006 Hz
•Output Impedance: 50 Ω ± 2%
•Supply Voltage: 100, 240V
•Applications: This generator is suitable for a wide range of applications including electronic design, sensor simulation, functional test, or serial data bus validation

Artikelnummer: 12657 Kategorien: ,


The BK Precision 4047B Dual Channel Function/Arbitrary Waveform Generator is capable of generating stable and precise sine, square, triangle, pulse, and arbitrary waveforms. CH1 and CH2 outputs are fully independent with individual on/off buttons and can both be varied from 0 to 10 Vpp into 50 ohms (up to 20 Vpp into open circuit). The generator provides linear and logarithmic sweep capabilities, AM/FM/PM/FSK/PWM modulation, and a continuously variable DC offset to inject signals directly into circuits at the correct bias level. Separate output amplitude and DC offset amplifiers let you set a large DC offset (e.g. ± 4.99 V) with a small amplitude output signal (e.g. 10 mV). The BK 4047B’s dual architecture, typically found in more expensive generators only, provides all the benefits of a DDS and a true point-by-point arbitrary waveform generator (AWG), without any limitations imposed by either technology.

•Dual-channel operation with each channel providing the rated amplitude (10 Vpp) over the entire frequency range
•Sine and square waveforms up to 20 MHz
•True point-by-point 14-bit, 125 MSa/s, 16-kpt arbitrary waveform generator
•Seamless integration with B&K Precision’s waveform editing software WaveXpress, allowing users to generate complex arbitrary waveforms
•Bright color display with waveform preview
•Synchronize the phase of both channels with the push of a button
•AM, FM, PM, FSK, and PWM internal and external modulation capabilities
•Gate and burst mode
•Low-jitter square wave generation for simulating reliable clock signals, generating triggers, or validating serial data buses
•USB interface and SCPI-compliant command set
•Internal/external triggering
•Gate and burst mode
•Built-in counter
•Short circuit protection for resistive and capacitive loads on outputs and overvoltage protection on inputs
•3 year warranty




Zusätzliche Information



BK Precision 4047B    20 MHz Dual Channel Function/Arbitrary Waveform Generator

BK Precision 4047B Produktdatenblatt

echo do_shortcode('[google-translator]');