Com-Power AL-RS101-SET Loop Antenna Set Including Transmitting Loop, Sensor Loop & Precision resistor

1.810,00 

AL-RS101-RX
•Frequency Range: 30 Hz to 100 kHz
•Loop Diameter: 4 cm
•Number of Turns: 51 Turns
•Wire Type: 7 Strand, 41 AWG Litz
•Loop Shielding: Electrostatic Shield
•Resistance of Wiring: 4Ω
•Inductance of Wiring: 180 μH
•Maximum Input Current: N/A
•Connectors: BNC (female)
•Specifications: MIL-STD-461, RS101
•Weight: 0.26 lbs. (0.12 kg)
AL-RS101-TX
•Frequency Range: 30 Hz to 100 kHz
•Loop Diameter: 12 cm
•Number of Turns: 20 Turns
•Wire Type: 12 AWG (enamel insulated)
•Loop Shielding:  N/A
•Resistance of Wiring: 40Ω
•Inductance of Wiring: 90 μH
•Maximum Input Current: 15 Amps (continuous)
•Connectors: (2) Banana Jacks
•Specifications: MIL-STD-461, RS101
•Weight: 2.2 lbs. (1 kg)

Artikelnummer: 0215 Kategorien: ,

Beschreibung

The Com-Power RS101 Loop Antenna Set is specifically designed for tests according to MIL-STD-461, RS101, radiated susceptiblity, magnetic field. During this test, the Equipment Under Test (EUT) is exposed to magnetic fields of a specified magnitude to ensure that it does not exhibit any malfunction, degradation of performance, or deviation from specified indications. Prior to the test, the field generated is calibrated by measuring the field with the AL-RS101-RX antenna, which is aligned coaxially with the AL-RS101-TX transmit loop with a separation distance of 5 cm. The RF current delivered to the transmit loop is monitored and then recorded when the required field is achieved at each test frequency.

•Transmit/Receive Loop Antenna Set for MIL-STD-461, RS101 Calibration/Test
•Convenient, Fixed Mounting Arrangement for Receive Loop onto Transmit Loop for Accurate Calibration of Test Level
•Individual Calibration per SAE ARP958 Included
•Three-year Warranty

Zusätzliche Informationen

Hersteller

Kategorien

Com-Power AL-RS101-SET       Loop Antenna Set Including Transmitting Loop, Sensor Loop & Precision resistor

Com-Power AL-RS101-SET Produktdatenblatt


echo do_shortcode('[google-translator]');