General
•Application: Audio Frequency Susceptibility Testing
•Standards: MIL-STD-461, RTCA DO-160, etc.
•Frequency Range: DC to 300 kHz
•Output Power: 200 Watts (into 2Ω), 225 Watts (into 1Ω)
•Input Signal: 0 dBm (maximum)
•Input Impedance: 50 ohms (nominal)
•Output Impedance: 1 ohm, 2 ohms
•Output Voltage: >10 Vrms (DC to 150 kHz with 0 dBm input)
•Distortion: ≤0.3%
•DC Drift: < ±1.5 mV (after 30 minutes of operation)
•Phase Response: ±5 degrees
•Residual Noise: 300 µV
•Signal-to-Noise Ratio: -100 dB
•Gain Linearity: 0.15%
•Common Mode Rejection: -60 dB
Electrical
•AC Input Power: 115/230 Volts AC, 50/60 Hz
Input/Output Connectors
•Input Connector: BNC (female)
•Output Connectors: (2) x 4 mm Banana Jack Binding Posts
•AC Power Input Connector: IEC C13 Receptacle
Eviromental
•Operating Temperature: 40º F to 104º F (5º C to 40º C)
•Cooling: Forced Air
Mechanical
•Dimensions(HxWxD): 5.2” x 19” x 15.7” (131 mm x 482 mm x 398 mm)
•Cooling: Forced Air