Com-Power CLCE-400 10kHz – 400MHz Current Probe for Emissions Measurement

•Frequency Range: 10 kHz to 400 MHz
•Window (Aperture) Diameter: 1.25″ (32 mm)
•Outside Diameter: 2.83″ (72 mm)
•Height: 0.76″ (19.3 mm)
•Weight: 0.275 lbs. (0.125 kg)
•Connector: Type-N (Female)
•Transfer impedance (ZtΩ): 7Ω*
•Transfer impedance (dBΩ): -21 to 17 dBΩ (typical)*
•Max Primary Current (DC-400 Hz): 100 Amps
•Max Primary Current (RF): 4 Amps
•Max. Core Temperature: 248℃F (120°C)
•Related Accessories Available from Com-Power: FCLCE-1000 Calibration Fixture, TEP-050 50Ω Terminator, SPA-815TGE Spectrum Analyzer
*Probe calibrated with 50Ω load impedance

Artikelnummer: 0210 Kategorien: ,

Beschreibung

Discontinued replaced by CLCE-438. The Com-Power CLCE-400 RF Current Probe is part of Com-Power’s extensive line of radio frequency conducted emission/ immunity test equipment and calibration accessories. The CLCE-400 is suitable for complaince measurements required by CISPR 22, CISPR 32, DO-160, Mil Std 461 etc, as well as for applied current monitoring during conducted immunity tests. It’s design incorporates a split-core ferrite in a rugged, circular hinged enclosure; thereby allowing the probe to be opened on one side in order to easily place the wire, cable(s) or cable bundle(s) to be tested into the probe window, making the CLCE-400 much more convenient to use than other non-split core probes. The CLCE-400 is designed to be used in conjunction with a spectrum analyzer or EMI receiver or any 50Ω impedance measurement equipment, which measure magnitude quantities in terms of true rms voltage.The Transfer Impedance conversion factor, defined as the ratio of secondary voltage to the primary current, is usually expressed in terms of dB over 1Ω, It is used to convert the voltage quantity into a current quantity, expressed in terms of dB over 1 uA. transfer impedance conversion: [dBuV] – [dBΩ] = [dBuA. The conversion factor may also be derived from the Transfer Admittance value, expressed in terms of dB over 1 S. transfer admittance conversion: [dBuV] + [dB(S)] = [dBuA].

•Suitable for CISPR, Mil-Std 461 & DO-160
•Individual calibration
•Three-year warranty

 

 

Zusätzliche Informationen

Hersteller

Kategorien

Com-Power CLCE-400     10kHz – 400MHz Current Probe for Emissions Measurement

Com-Power CLCE-400 Produktdatenblatt


echo do_shortcode('[google-translator]');