Com-Power CLCI-400 10KHz – 400MHz, 100 Watts Bulk Current Injection Probe

5.150,00 

•Frequency Range: 10 kHz to 400 MHz
•Window Diameter: 1.575″ (40 mm)
•Outside Diameter: 5.75″ (146 mm)
•Width: 2.75″ (70 mm)
•Weight: 4.5 lbs. (2.04 kg)
•Input Connector: Type-N (female)
•Max. Input Power: 100 Watts (continuous)
•Turns Ratio: 1:1
•Max. Core Temperature: 110° C – 230° F

Artikelnummer: 0208 Kategorien: ,

Beschreibung

The Com-Power CLCI-400 Bulk Current Injection Probe is part of ComPower’s extensive line of radio frequency conducted immunity test equipment and calibration accessories; geared specifically to comply with the requirements contained in RTA/DO-160F, Mil-Std-461. The CLCI-400 incorporates split-core ferrites into its rugged, circular enclosure, and is hinged; thereby allowing the probe to be opened on one side in order to easily place the wire, cable(s) or cable bundle(s) to be tested into the probe window, making the CLCI-400 much more convenient to use than other non-split core probes. The efficiency of the CLCI-400 probe enables it to achieve test levels up to 10 Vrms across its frequency band with less than 100 watts forward power. The probe can handle up to 100 amps „window current“ on its secondary, and up to 100 watts RF input power to its primary. An RF Current probe is typically used in conjunction with spectrum analyzer or EMI receiver, which measure magnitude quantities in terms of true rms voltage. The Transfer Impedance conversion factor, which is expressed in terms of dB over 1Ω, converts the voltage quantity into a current quantity, expressed in terms of dB over 1 uA.  transfer impedance conversion: [dBuV] – [dBΩ] = [dBuA].

•Complies with RTCA/DO-160, Mil-Std-461
•Current Injection & Monitoring capability
•Three-year warranty

Zusätzliche Informationen

Hersteller

Kategorien

Com-Power CLCI-400        10KHz – 400MHz, 100 Watts Bulk Current Injection Probe

Com-Power CLCI-400 Produktdatenblatt


echo do_shortcode('[google-translator]');