Com-Power LI-3P-216 9kHz – 30MHz LISN – Three phase, 50 uH and 250 uH, 16 Amps, FCC/EN/CISPR

4.710,00 

•Standards: Met ANSI C63.4, CISPR 16-1-2
•RF Connector: RF Measurement Port 50Ω – N-Type (female)
•AC Voltage (maximum): 500 Voltsrms (line to line), 288 Voltsrms (line to ground)
•DC Voltage (maximum): 705 Volts DC
•Frequency Range: 9 kHz to 30 MHz
•Inductors: 50 µH
•Insertion loss: less than 0.7 dB
•Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack
•Current Rating: 16 Amperes
•Application/Test Type: Power Line Conducted Emissions Tests
•Isolation: more than 40 dB
•Weight: 45.9 lbs. (20.8 kg

Artikelnummer: 0221 Kategorien: ,

Beschreibung

The Com-Power LI-3P-216 LISN provides the necessary measurement platform for performing power line conducted emissions compliance testing as required by most worldwide standards for commercial products. The LISN will perform each of the following functions during the measurement:
•provide a defined, stable impedance across the measurement frequency range;
•isolate the EUT and measurement circuit from the power source, thereby minimizing its influence on the measurements; and,
•couple the disturbance voltages to the coaxial measurement port, which connects to the measuring instrument.
The LI-3P-216 LISN uses air-core inductors to prevent saturation and permeability variation. The mounting plates are left unpainted in order to facilitate connection to earth ground in their installation, which is essential due to high leakage currents. The side panels for the LISN are louvered for cooling purposes.

•Remote Switching of Line Under Test
•Four-conductor, 50Ω, 50/250 μH +5Ω Networks for 3Ø Delta and Wye Power Configurations
•Three-Year Warranty

 

 

Zusätzliche Informationen

Hersteller

Kategorien

Com-Power LI-3P-216        9kHz – 30MHz LISN – Three phase, 50 uH and 250 uH, 16 Amps, FCC/EN/CISPR             

Com-Power LI-3P-216 Produktdatenblatt


echo do_shortcode('[google-translator]');