Seite wählen

Aim TTi CPX400DP 2 x 60V/20A 420W Programmable DC Power Supply Dual Outputs, USB, RS232 LAN & GPIB Interfaces


•Number of outputs: 2
•Output voltage: 0-60V DC
•Output current: 0-20A
•Rated power: 840W
•Voltage Setting: Resolution/Accuracy: 1mV / ± (0.05% +10mV)
•Current Setting: Resolution/Accuracy: 1mA / ± (0.3% +5mA
•RS-232: Standard 9-pin D connector. Baud rate 9,600.
•USB: USB 2.0 connection (backwards compatible with USB 1.x). Operates as a virtual COM port.
•GPIB (IEEE-488): The interface conforms with IEEE-488.1 and IEEE-488.2.
•Ethernet (LAN): Standard 10/100 base-T hardware connection. ICMP and TCP/IP Protocol for connection to Local Area Network or direct connection to a single PC.
•LXI Compliance: LAN interface is compliant with LXI class C. (LXI is the abbreviation for Lan eXtensions for Instrumentation)

Artikelnummer: 00324 Kategorien: ,


The Aim TTi CPX400DP is the highest power variants of the CPX series.PowerFlex regulation enables the 840 watts of total power to be configured to suit each specific application. The two 420 watt outputs can each supply up to 60 volts or up to 20 amps. See below for power curve. Isolated tracking enables the outputs to be wired in series or parallel whilst controlled from a single voltage adjustment for up to 120 volts or 40 amps. The CPX400DP includes rear terminals and USB, RS232, GPIB and LXI compliant LAN interfaces.

•PowerFlex design gives variable voltage and current combinations within a maximum power range
•Up to 60 volts and up to 20 amps 180 watts or 420 watts maximum per output
•Constant voltage or constant current operation
•Settings Locking (S-Lock)
•PowerFlex or fixed-range operation plus custom limits
•True analogue controls with digital settings locking
•Independent outputs or isolated voltage tracking (dual)
•Outputs can be wired in series or parallel for 120V or 40A
•Variable OVP trips; safety binding-post terminals
•4 digit fixed resolution meters; selectable remote sensing
•Compact ½ rack 3U case (dual) or ¼ rack 3U case (single)
•Duplicate terminals at rear on CPX400SA, SP & DP
•GPIB, RS-232, USB and LAN interfaces with LXI class C compliance (CPX400SP & CPX400DP only)

Zusätzliche Information



Aim TTi CPX400DP         2 x 60V/20A 420W Programmable DC Power Supply Dual Outputs, USB, RS232 LAN & GPIB Interfaces

Aim TTi CPX400DP Produktdatenblatt

echo do_shortcode('[google-translator]');