Beschreibung

The IET Labs LD-3T High-Temperature Rigid Dielectric Cell is designed for testing rigid flat materials at elevated temperatures in a oven. The dielectric cell can be used in environments up to 200 Degrees C. Designed for use of solids, semi-solids; plastics, epoxy; thin film; laminates; PC boards.
Material up to 8cm (3 1/8 inches) with a maximum thickness of 1.1 cm (7/16 inch) can be used in the dielectric cell. The dielectric cell is made up of two electrodes. One electrode is fixed with a grounded guard ring and the other is movable via a micrometer. The micrometer allows precise measurement of electrode spacing. The grounded guard ring reduces fringe effects to improve measurements. The dielectric cell has a usable frequency range from 50 Hz to 1MHz. The three terminal electrical connections are made via GR-874 Connection on the fixed electrode side (optional BNC to GR-874 adapter is available) and banana connection on the movable electrode side. A 1-meter, high-temperature Teflon BNC to BNC-T cable set is available for connection to the cell.

Required Accessories:
1 x LD-04T High Temperature 1 Meter BNC to BNC cable set
2 x LD-02   BNC T Adapters
1 x LD-08   GR874 to BNC Adapter
1 x LD-05T BNC to Banana Adapter