Seite wählen

Com-Power LI-215A 9kHz – 30MHz LISN Multiline, 50 uH & 250 uH, 15 Amps, FCC/EN/CISPR

2.346,00 

•Specification: CISPR 16-1-2 / ANSI C63.4
•Application: Power Line conducted emission tests
•Frequency Range: 9 KHz – 30 MHz
•RF Connector: 50 Ohms N-type (female)
•Current Rating: 15 Ampere AC, 10 Ampere DC
•Voltage Rating: 270 VAC (Line to Ground), 380 VDC
•Inductors: 50 μH (air-core)
•Mains & EUT Connections: IEC 60320 @ Mains and NEMA 5-15 R @ EUT
•Dimensions (each network): 17 x 16 x 7 inches / 43 x 40 x 18 cm
•Weight (each network): 21 lbs / 9.5 kg
•Insertion Loss: < 6 dB (150 kHz – 30 MHz)
•Isolation: > 20 dB (150 kHz – 30 MHz)

Artikelnummer: 0160 Kategorien: ,

Beschreibung

The Com-Power LI-215A Line Impedance Stabilization Network (LISN) provides the necessary measurement platform for performing power line conducted emissions compliance testing as required by most worldwide standards for commercial products. The LI-215A is compliant with both CISPR 16-1-2 and ANSI C63.4. The LISN provides defined stable impedance and isolates the EUT from power source influences, thereby providing accurate and repeatable results. The LI-215A includes one pair of single-conductor networks, housed together, to be installed in series with each current-carrying conductor in a single- phase, dual-phase or DC power system. A second LI-215A pair can be used to accommodate 3-phase power systems (Wye or Delta configurations). The LI-215A is equipped with IEC connector at the mains (power input) and NEMA 5-15R at EUT (power output) ports. This LISN uses air-core inductors to prevent saturation and permeability variation. The mounting plate of the LI-215A is left unpainted in order to facilitate connection to earth ground in its installation, which is essential due to high leakage current. It has a built in transient limiter for impedance matching, reduction of out-of-band emissions, and transient protection for your measurement Instrument.

•Fully compliant with CISPR 16-1-2 / ANSI C63.4
•“Air-core” inductors to prevent saturation
•Individual Calibration Included
•Three-Year Warranty

 

 

Zusätzliche Information

Hersteller

Kategorien

Com-Power LI-215A     9kHz – 30MHz LISN Multiline, 50 uH & 250 uH, 15 Amps, FCC/EN/CISPR

Com-Power LI-215A Produktdatenblatt

echo do_shortcode('[google-translator]');