Beschreibung

The Picotest J2131ABUNDLE includes J2131A DC Bias Source, P9610A power supply, J2113A differential amp, three (3) PDN cables (two (2) 0.5 m BNC-SMA cables and one (1) 0.25 m BNC BNC BNC cable) The bundle allows 2-port shunt continuity measurement for your VNA or oscilloscope with FRA functions. Biased requirements and notes on inductance measurement: The J2131A uses the 2-port shunt through the test configuration to perform the inductor measurement. It cannot perform the measurement itself. 2-port shunt continuity measurement REQUIRES a ground loop breaker, such as .B the J2113A. The PDN cables are optional but offer improved accuracy in 2-port measurement, so they are recommended. In addition, the J2131A must be powered by a power supply that can provide enough power (current is multiplied by a factor of 5). The P9610A is recommended. Many applications such as Power Distribution Network (PDN) design, require series inductance as part of the overall decoupling design. Good power integrity design, analysis, and simulation requires that models be accurate. You can bias the inductors in a continuous fashion from 0ADC to 125ADC while measuring the inductance changes over bias and frequency. Easy ADS, SPICE, and s-parameter (Touchstone) model generation is then possible.

•1 Year Warranty