Picotest P2103A Differenzial TDR Probe

2.780,00 

•Bandwidth: DC-6GHz (uncorrected)
•Probe Pin Pitch/Spacing Comes with one each of the following: 50mil – 1.27mm, 100mil – 2.54mm
•Custom pitches available
•Impedance Range: Typical 1-port impedance reflection floor -ceiling limits (~100mohms – ~100k ohms). Not probe dependent.
•Input C: <1pF
•Attenuation: 1X, NOT user changeable
•Probe Connectors: SMA
•Probe Loading Input: 50 ohms
•Operating Temperature: 0 to 45° C (32° F to 104° F) at 80% Relative Humidity
•Nominal Length with Cable: 0.5 meter
•Maximum Relative Humidity: 80% at 31° C max
•Altitude: 3000 m (9850 feet)
•Absolute Maximum Voltage: < 50VAC and 75VDC

Artikelnummer: 0016 Kategorien: ,

Beschreibung

The Picotest P2103A probe is a 100 ohm input impedance differential transmission line ‚browser‘ probe for TDR/TDT applications. This precision probe supports a variety of measurements. To characterize a differential pair, the TDR must drive a differential signal and measure the response as the reflected differential signal. This requires two channels to be connected to the same end of the differential pair, and have the equivalent of two, simultaneous stimulus – either launching a differential signal or launching a common signal into the device under test (DUT). This is done with a differential TDR. The P2103A is a referred to as a ‚browser‘ probe for its ability to easily and quickly be moved from point-to-point/rail-to-rail simply by re-seating the probe points. The probe achieves a very low inductance at the tip to mitigate space constraints on a dense PCB, while eliminating the need to add additional SMA connections or other test points necessary for impedance measurements. It is especially useful when there are multiple trace pairs to assess and there is no time for PCB iterations to provide test point implementations for each. Repeated measurements are simplified because connection is by simply touching the tips to existing traces. The fixed spacing between signal pins provides for highly reliable and repeatable data measurements. The rugged, ergonomic design allows easy TDR measurements by hand. The slim body with the extended tips provides good visibility of the target.

Zusätzliche Informationen

Hersteller

Kategorien

Picotest P2103A                 Differenzial TDR Probe                            

Picotest P2103A Produktdatenblatt


echo do_shortcode('[google-translator]');