Seite wählen

Picotest VRTS3 Distributed System Demo Board V1.0

Section’s functions:
•POL – 5V USB input to 3.3V 2.8MHz switching regulator
•REF03 – 2.5V low noise voltage reference
•OPAMP – 245MHz Bandwidth unity gain opamp buffer
•LDO – LD1086 voltage regulator 5V USB input to 3.3V output
•CLOCKS/BUFFERS – 10MHz and 125MHz clocks
•CALIBRATION – Short-Open-Load and 1 Ohm calibration ports
•PLANES & CAPS – Parallel tantalum and ceramic capacitor on a small PCB plane
•MICROSTRIPS – 50Ω microstrips with precision aberrations – one with a ground void

Artikelnummer: 0053 Kategorien: ,

Beschreibung

The Picotest VRTS3 demonstration board is a self‐contained board designed to support a wide range of typical distributed system measurements. Input power is provided via a USB port using a typic al USB‐A to USB‐B cable. No additional equipment is required for this board other than the measurement instruments.
The board contains eight individual circuit sections. These circuits are typical in most distributed systems providing an excellent test bed for demonstrating non‐invasive, in‐system measurement, optimization, and troubleshooting techniques.

Box Contents: (1) Main Board

Zusätzliche Information

Hersteller

Kategorien

Picotest VRTS3        Distributed System Demo Board V1.0              

Picotest VRTS3 Produktdatenblatt


echo do_shortcode('[google-translator]');