Tektronix SG5010 10Hz–100KHz Ultra-Low Distortion Oscillator

•10 Hz to 100 kHz Sine Wave Output
•Ultra-Low Distortion: 0.0008% THD
•Sine Wave, Sine-Wave Burst – SMPTE/DIN: 10 Hz to 163.80 kHz ±0.01%. CCIF Center Frequency: 2.500 to 163.80 kHz ±0.01%. Square Wave: 10 Hz to 16.380 kHz ±0.01%
•Sine Distortion: 20 Hz to 20 kHz: 0.001% (-100 dB)
•Output Level Range and Accuracy
-Balanced – into open circuit: 200 µV to 21.2 V RMS. Into 600 ohms: -72.45 to +28.05 dBm.
-Unbalanced – into open circuit: 200 µV to 21.2 V RMS. Into 600 ohms: -72.45 to +22.05 dBm
•Output Impedance and Configuration: 50 ohms ±3%, 150 ohms ±2%, or 600 ohms ±1%, balanced or unbalanced, floating or grounded

Artikelnummer: 12088 Kategorien: ,


The Tektronix SG5010 Programmable Oscillator generates a ultra-low distortion sine wave from 10Hz to 163.8kHz with less than 0.0008% THD. The THD is typically less than 0.0003% in the 20Hz to 20kHz range. The unit offers the full benefits of TM 5000 configurability, GPIB compatibility, and compliance with Tektronix Standard Codes and Formats. It generates five waveforms: sine wave, square wave, SMPTE/DIN intermodulation test signal, CCIF intermodulation test signal, and sine wave burst. All of these signals may be swept in frequency and amplitude.

Zusätzliche Informationen



Tektronix SG5010          10Hz–100KHz Ultra-Low Distortion Oscillator

Tektronix SG5010 Produktdatenblatt

echo do_shortcode('[google-translator]');