Seite wählen

Com-Power LIN-120A 150kHz – 30MHz, FCC/EN/CISPR, multiline LISN, 20A, 50 uH -CE marked

•Specification: CISPR 16-1-2 / ANSI C63.4
•Application: Power Line conducted emission tests
•Frequency Range: 150KHz – 30 MHz
•RF Connector: 50 Ohms N-type (female)
•Current Rating: 20 Amperes AC, 14 Amperes DC
•Voltage Rating: 270 VAC (Line to Ground), 380 VDC
•Inductors: 50 microhenry (air-core)
•Mains & EUT Connections: IEC 60320, C-20 @Mains and Universal multi-configuration @ EUT
•Insertion Loss: <0.5 dB (150 kHz – 30 MHz)
•Isolation: > 40 dB (150 kHz – 30 MHz)

Artikelnummer: 0239 Kategorien: ,


The LIN-120A discontinued, replaced by LIN-120C.
The Com-Power LIN-120A Line Impedance Stabilization Network (LISN) provides the necessary measurement platform for performing power line conducted emissions compliance testing as required by most worldwide standards for commercial products. The LIN-120A is compliant with both CISPR 16-1-2 and ANSI C63.4. The LISN provides defined stable impedance and isolates the EUT from power source influences, thereby providing accurate and repeatable results. The LIN-120A includes one pair of single-conductor networks, housed together, to be installed in series with each current-carrying conductor in a single-phase, dual-phase or DC power system. A second LIN-120A pair can be used to accommodate 3-phase power systems (Wye or Delta configurations).

•Fully compliant with CISPR 16-1-2 / ANSI C63.4
•“Air-core” inductors to prevent saturation
•Built-in Transient Limiter
•Individual Calibration Included
•Three-Year Warranty

Zusätzliche Information



Com-Power LIN-120A       150kHz – 30MHz, FCC/EN/CISPR, multiline LISN, 20A, 50 uH -CE marked            

Com-Power LIN-120A Produktdatenblatt

echo do_shortcode('[google-translator]');