The Com-Power SGIEC-645 is a state of the art, compliance level Surge Generator designed for IEC 61000-4-5 surge immunity testing. It is capable of generating both the 1.2/50, 8/20 μs combination wave, and also the 10/700, 5/320 μs combination (telecom) wave. Output levels are adjustable from 200V to 4 kV in one volt increments.
Surges can be applied to single-phase AC or DC power lines (up to 16A) using the integral, internal Coupling/ Decoupling Network (CDN).
Using the auxiliary (A/B) output terminals and available external CDNs, surges can also be applied to•unshielded, unsymmetrical interconnection (data) lines (1.2/50, 8/20 μs waveform)
•unshielded, indoor symmetrical interconnection (telecom) lines (1.2/50, 8/20 μs waveform)
•unshielded, outdoor symmetrical communication (telecom) lines (10/700, 5/320 μs waveform)
•shielded lines (1.2/50, 8/20 μs waveform – no CDN req.’d)
•single-phase and three-phase power lines at current levels up to 32 or 100 Amps
The SGIEC-645 Surge Generator is equipped with voltage (Vmon [1000×1]) and current (Imon [100×1]) monitor ports for verification of peak voltage/ current output levels. Also, the synch output port connects to the external trigger input of the oscilloscope.
•Peak Surge Output Voltage Level Adjustable from 200V to 4000V for each Waveform
•Can be operated via front panel interface or \ remote PC through fiber optic interface with TransWare-645 software
•Internal Power Line CDN (up to 16 Amps AC)
•External Power Line CDNs Available with AC current ratings up to 100 Amps