Beschreibung

The Picotest J2160A Probe Adapter provides a low noise, compact solution when using the E5061B T/R ports in a 2-port shunt thru measurement. The T/R ports are desirable for low frequency 2-port measurements, since these ports are semi-floating, allowing low impedance measurements without the use of a coaxial common mode transformer such as the J2102A. The floating ports allow milliohm measurements even at very low frequency and up to the 30MHz range of the T/R ports. The current solution uses a resistive 6dB port splitter combined with coaxial cables to support this measurement. The J2160A is a slim profile adapter, converting the three E5061B BNC ports to two BNC ports for the 2-port measurement. The 6 dB resistive port splitter is included internal to the adapter so no external splitter or cables are required. The short connections are neater, consume less bench space, and can result in a lower noise measurement. The adapter can also be combined with ultra-wide bandwidth DC blockers, such as the Picotest P2130A. This allows you to make 2-port measurements of sensitive devices without the 50 ohm DC port loading, which could overload the device being measured and/or severely distort the measurement results. The Picotest adapter also supports the extended 2-port shunt thru measurement, allowing higher impedance 2-port measurements by adding a series resistor to each port. •Consumes less bench space than other solutions •Neater connections consume less bench space •Rugged, comfortable, ergonomic design; slim form factor •Easy to attach and detach What’s included: •Probe Adapter Panel for the E5061B ENA’s T/R Ports •Includes the 6dB resistive port splitter internal to the Adapter •One Year Warranty