Com-Power CGO-51000 1GHz to 40GHz, 1GHz Step Comb Generator


•Intended Application: EMI Radiated Site Reference Source
•Frequency Range: 1 GHz to 40 GHz
•Frequency Step Size: 500 MHz
•Frequency Stability: 25 ppm
•Amplitude Stability: ± 0.1 dB
•Time Stability: <1 dB over 12 months
•Charger Output / Input: 6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 Hz
•Battery Type: 6V NiMH, 1 Ah
•Operating Time: >18 Hours Typical With Fully Charged Battery
•External Indicators: Battery Low and Power On
•Antenna Size: Built-in Antenna
•Dimensions: 7.0 x 1 inches / 17.8 x 2.5 cm
•Weight: 2.5 lbs / 1.1 kg
•Polarization: Vertical and Horizontal

Artikelnummer: 0148 Kategorien: ,


The Com-Power CGO-51000 Comb Generator is a radiated reference signal source. It is a self-contained source of signals consisting of frequency harmonics at 1 GHz intervals, and is usable from 1 GHz to 40 GHz. The signals generated by CGO-51000 are stable and can be used as reference for validating high frequency test setups in open area test site or anechoic chamber. The CGO-51000 Comb Generator has an omni directional built-in antenna, which works in conjunction with the chassis of the unit. The circular chassis of the Comb Generator helps radiate the signal uniformly in all directions in the horizontal plane. The built-in antenna of the CGO-51000 provides improved signal stability, however it cannot provide conducted reference signals. The CGO-51000 Comb Generator is powered by a rechargeable internal battery pack. The internal power eliminates the need for an external power cable and its effect on the radiated signal pattern or level. When fully charged, the battery allows continuous use of the Comb Generator for up to 18 hours. The Comb Generator and its charger are shipped with a custom wooden storage box.

•Stable Frequency Output
•Automatic Low Voltage Signal Shutoff
•Battery Operated
•Three-Year Warranty

Zusätzliche Informationen



Com-Power CGO-51000         1GHz to 40GHz, 1GHz Step Comb Generator

ComPower CGO-51000 Produktdatenblatt

echo do_shortcode('[google-translator]');